Perle Systems IOLAN SCS Bedienungsanleitung PDF herunterladen (Seite 142)

100

101

Serial Port Profiles

142 IOLAN SDS/SCS/STS User’s Guide, Version 3.6

SSH Settings

The SSH settings apply when the User Service is set to SSH or the Terminal profile specifies an

SSH connection to a host.

Configure the following parameters:

Terminal Type Type of terminal attached to this serial port; for example, ANSI or WYSE60.

Verbose Mode When enabled, displays debug messages on the terminal.

Default: Disabled

Enable

Compression

When enabled, requests compression of all data. Compression is desirable on

modem lines and other slow connections, but will only slow down things on

fast networks.

Default: Disabled

Auto Login When enabled, creates an automatic SSH login, using the Name and Password

values.

Default: Disabled

Name The name of the user logging into the SSH session.

Field Format: Up to 20 alphanumeric characters, excluding spaces

Password The user’s password when Auto Login is enabled.

Field Format: Up to 20 alphanumeric characters, excluding spaces

SSH1 When enabled, selects an SSH version 1 connection.

Default: Enabled

SSH1 Cipher Select the encryption method (cipher) that you want to use for your SSH

version 1 connection:

Data Options:

z 3DES

z Blowfish

Default: 3DES

SSH2 When enabled, selects an SSH version 2 connection. If both SSH 1 and SSH 2

are selected, the IOLAN will attempt to make an SSH 2 connection first. If that

connection fails, it will attempt to connect to the specified host using SSH 1.

Default: Enabled

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 407 408

Kommentare zu diesen Handbüchern

Keine Kommentare

Perle Systems IOLAN SCS Bedienungsanleitung Seite 142

Kommentare zu diesen Handbüchern